Selected Publications


Selected Publications in SCI Expanded Journals 

2018

Aldemir, E., Özdemir, H., Zekeriya, S. (2018). An Improved Gray Line Profile Method to Inspect the Warp-Weft Density of Fabrics, The Journal of The Textile Institute, DOI: 10.1080/00405000.2018.1467743, 1-12.

Atasagun H.G., Okur A., Psikuta A., Rossi R.M. Annaheim S. (2018). Determination of the effect of fabric properties on the coupled heat and moisture transport of underwear–shirt fabric combinations, Textile Research Journal, 88(11), 1319-1331.

Balci Kilic, G., Okur A., Effect of Yarn Characteristics on Surface Properties of Knitted Fabrics, Textile Research Journal, DOI: 10.1177/0040517518797337.

Camgöz, B., Özdemir, H., (2018). A Research on the Gamma Radiation Shielding Effectiveness of Diced Woven Fabrics, Tekstil ve Konfeksiyon, 28(1), 91-100.

Erkan Gökhan, Şengül Kemal, Akkaş Münevver, Büyükpoyraz Sinem, “PIGMENT PRINTING OF COTTON FABRICS WITH CYCLODEXTRIN AND BIFUNCTIONAL REACTIVE DYE”, ANNALS OF THE UNIVERSITY OF ORADEA FASCICLE OF TEXTILES,LEATHERWORK, 19,2, 43-48, 2018

Kılınç, A.Ç. ve ark. (2018). Extraction and investigation of lightweight and porous natural fiber from Conium maculatum as a potential reinforcement for composite materials in transportation, Composites Part B:Engineering, 140, 1-8.

Kurbak, A. (2018). Models for basic warp knitted fabrics Part I: Chain stitches and their applications on marquisette and weft-inserted warp-knitted fabrics, Textile research Journal, https://doi.org/10.1177/0040517518779992 .

Kurbak, A. (2018). Models for basic warp knitted fabrics Part II: single guide bar fabrics (closed-lap and open-lap), Textile Research Journal,  https://doi.org/10.1177/0040517518779992

Kurbak, A. (2018). Models for basic warp knitted fabrics Part III: the two guide bar fabrics (Double Tricot, Locknit, Reverse Locknit, Satin, Sharkskin), Textile Research Journal,  https://doi.org/10.1177/0040517518779998.

Kurbak, A. (2018). Load–extension properties of glass plain knitted technical fabrics: Part I: some additions to the extension of the circular ring problem to make it applicable for a knitted loop head curve, Textile Research Journal, 88(6), 654-666.

Özdemir, H. (2018). Air Permeability of Worsted Fabrics, Industria Textila, 69(4), 322-327.

Özdemir, H. (2018). Effects of Sizing and Yarn Structural Properties on the Physical Properties of Combed and Carded Cotton Ring Yarns, Industria Textila, 69(2), 81-86.

Özdemir, H., Camgöz, B., (2018). The GammaRadiation Shielding Effectiveness of Textured Steel Yarn Based Fabrics, Industria Textila, 69(1), 44-49.

Özdemir, H., Camgöz B., (2018). Gamma Radiation Shielding Effectiveness of Cellular Woven Fabrics, Journal of Industrial Textiles, 47(5), 712-726 (2018).

Özdemir, H., İçten, B.M. (2018). The Mechanical Performance of Plain and Plain Derivative Woven Fabrics Reinforced Composites: Tensile and Impact Properties, The Journal of The Textile Institute, 109(1), 133-145.

Sabuncu, M., Özdemir, H., (2018). Recognition of Weave Patterns of Striped and Coloured Fabrics Using Optical Coherence Tomography, FIBRES & TEXTILES in Eastern Europe, 26, 3(129), 98-103.

Seki, Y. (2018). Enhancement of Electrical Conductivity of Polyethylene Terephthalate (PET) Fabrics via Ionic Liquids, Polymer-Plastics Technology and Engineering, https://doi.org/10.1080/03602559.2018.1466163

Seki, Y. ve ark. (2018). Surface modification of new cellulose fiber extracted from Conium maculatum plant: a comparative study, Cellulose, 25(6), 3267-3280.

Seki, Y. (2018). Conductive Cotton Fabrics Coated with Myristic Acid/Zinc Oxide Nanoparticles, Polymer-Plastics Technology and Engineering, 57(8), 766-774.

Sülar, V. ve Seki, Y. (2018). A review on fabric bagging: the concept and measurement methods, The Journal of The Textile Institute, 109(4), 466-484.

Sülar, V., Öner, E. (2018). Impact of Repeated Home Laundering on Cyclic Deformation Performance of Elastane Knitted Sportswear Fabrics, Fibres and Textile in Eastern Europe basım tarihi ve sayısı:2019/1)

Yıldırım P, Birant D, Alpyıldız T, (2018). Data Mining and Machine Learning in Textile Industry”, Wiley Interdisciplinary Reviews: Data Mining and Knowledge Discovery, 8, 1-20.

2017 

  • Demir, M. ve Kılıç, M. (2017). Büküm iplikçiliği (Siro-Spun) teknolojisindeki gelişmeler ve hibrit eğirme teknolojileri, Tekstil ve Mühendis, 24/105/31-40/2017. Demir, M. ve Kılıç, M. (2017). Investigating possibilities of three-strand yarn production, Fibres and Textiles, Chemical Abstracts, World Textile Abstracts 24(1), 30-35.
  • Demir, M., Okur,   B., Nasibov, E. (2017). Application of Fuzzy Logic Based Apparel Size Finder in Online Marketing, Annals of the Unıversity of Oradea. Fascicle of Textiles, Leatherwork.
  • Kara, S., Yeşilpınar, S., Şenol, Y., Akkan, T. (2017). Design of an electronically equipped sailing garment for improved safety, Industria Textila, 68, 1, 23-30.
  •  Kartal, G.E., Sarıışık, A.M., Erkan, G., Öztürk, E.A., Öztürk, B. (2017). Effects of liposome-assisted peroxide bleaching on woolen fabric properties, AATCC Journal of Research, 4, 9-15.
  • Kurbak, A. (2017). Extension properties of glass plain knitted technical fabrics: Part I: Some additions to the extension of the circular ring problem to make it applicable for a knitted loop head curve, Textile Research Journal, DOI: 10.1177/0040517516688626.
  • Kurbak, A. (2017). Extension properties of glass plain knitted technical fabrics. Part II: Extensions in the course-wise and wale-wise directions, Textile Research Journal, DOI: 10.1177/0040517516688627.
  • Kurbak, A. (2017). Geometrical models for weft-knitted spacer fabrics, Textile Research Journal, DOI: 10.1177/0040517516631320.  Özdemir, H. (2017). Permeability and wicking properties of modal and lyocell woven fabrics used for clothing, Journal of Engineered Fibers and Fabrics, 12(1), 7-21.
  • Seki, Y. ve Seki, Y. (2017). Development of conductivity of acrylic polymer using ionic liquids incorporated with zinc oxide nanoparticles, Polymer-Plastics Technology and Engineeringhttp://dx.doi.org/10.1080/03602559.2017.1298793.
  • Seki, Y., Akşit, A. ve Erdoğan, Ü.H. (2017). Construction of polypropylene composite multifilaments filled with sodium perborate trihydrate-treated jute microparticles, Science and Engineering of Composite Materials, 24(2), DOI: https://doi.org/10.1515/secm-2014-0355.

2016 

  • Aka, C., Basal, G.,”Production of Novel Textile-Based Artificial Anterior Cruciate Ligament”, Tekstilec, 59(2),p.121-125, 2016, Araştırma Makale, Hakemsiz Dergi DOI:10.14502/Tekstilec2016.59.121-125
  • Aksit, A., Onar, N., Kutlu, B., Sergin, E., Yakin, I. (2016). Synergistic effect of phosphorus, nitrogen and silicon on flame retardancy properties of cotton fabric treated by sol-gel process. International Journal of Clothing Science and Technology, 28(3), 319-327.
  • Atasağun, H.G., Okur, A. A test apparatus to measure vertical wicking of fabrics-a case study on shirting fabrics, The Journal Of The Textile Institute Vol. 107 , Iss. 12,2016. Büyükbayraktar, R.B. “An investigation on the bagging load of different woven fabrics”, Industria Textila, 2016, vol. 67, nr. 1, pg.25-32
  • Erdem, D., Sevil Yesilpinar , Yavuz Senol , Didem Karadibak , Taner Akkan , (2016) “Design of TENS electrodes using conductive yarn”, International Journal of Clothing Science and Technology, Vol. 28 Iss: 3, pp.311 – 318 Erdem, D., Sevil Yeşilpınar, Yavuz Şenol, Taner Akkan, Didem Karadibak, (2016) “Design of TENS Electrodes Using Different Production Techniques”, Tekstilec, Vol.59(2), pp. 132-136
  • Erdoğan ÜH, Seki Y, Aydoğdu G, Kutlu B, Akşit A,”Effect of different surface treatments on the properties of jute”, Journal of Natural Fibers, Vol. 13, 158-171, 2016.
  • Erkan G, Yılmaz D., dyeing of wool yarns with laurus nobilis l. Berries, Annals of the unıversıty of oradea fascıcle of textıles, Leatherwork, V 17, İssue 2, pp 53-58.
  • Gönülşen, İ., Sarıışık, M., Erkan, G., Okur, S., Portakal yağı içeren mikro ve moleküler kapsül aktarılmış kumaşlardan salım davranışlarının incelenmesi,Tekstil ve Mühendis, 2016, 23,101,22-33.
  • Kara, S., Ureyen, M. E., & Erdogan, U. H. (2016). Structural and Antibacterial Properties of PP/CuO Composite Filaments Having Different Cross Sectional Shapes. International Polymer Processing, 31(4), 398-409. Kara, S., Yesilpinar, S., Senol, Y. & Akkan, T. Design of an Electronically Equipped Sailing Garment for Improved Safety. Industria Textila.   (Kabul edildi)
  • Kılıç, G.B., Okur, A. A comparison for the physical properties of cotton, modal and acrylic yarns spun in ring and OE-rotor spinning systems,industria textila, vol:67, No:2, 81-90, 2016.
  • Özdemir H., “Effects of Sizing and Yarn Structural Properties on the Physical Properties of Combed and Carded Cotton Ring Yarns”,/Industria Textila/, Kabul edildi.
  • Özdemir H., “Influence of Titanium Dioxide Finish Prepared by Sol-Gel Technique on the Ultraviolet Protection Characteristics of Cotton/Polyester Blend Fabrics Used for Clothing”, /Industria Textila/,
  • Özdemir H., “Permeability and Wicking Properties of Modal and Lyocell Woven Fabrics Used for Clothing”, /Journal of Engineered Fibers and Fabrics/, Kabul edildi.
  • Özdemir H., Camgöz B., “Gamma Radiation Shielding Effectiveness of Cellular Woven Fabrics”, /Journal of Industrial Textiles/, DOI: 10.1177/1528083716670309, 1-15 (2016).
  • Özdemir H., “Thermal Comfort Properties of Clothing Fabrics Woven with Polyester/Cotton Blend Yarns”, /AUTEX Research Journal/, DOI: 10.1515/aut-2016-0012, 1-7 (2016).
  • Sabuncu M.H., *Özdemir H.*, “Recognition of Fabric Weave Patterns Using Optical Coherence Tomography”, /The Journal of The Textile Institute/, *107(11)*, 1406-1411 (2016).
  • Seki, Y., Seki Y., Sarıkanat, M., Sever, K., Durmuşkahya, C., Bozacı, E. (2016). Evaluation of linden fibre as a potential reinforcement material for polymer composites, Journal of Industrial Textiles, 45(6), 1221-1238.
  • Sülar, V., Oner, E., Devrim, G., Aslan, M. and Eser, B. (2016). A Comparative Study on Performance Properties of Yarns and Knitted Fabrics Made of Biodegradable and Conventional Fibers, Fibers and Polymers, Vol.17, No.12, 2085-2094.
  • Sülar, V. Prediction of Fabric Bagging Occurred by an Artificial Arm Under Dynamic Conditions, J Fashion Technol Textile Eng 2016, S2, DOI: 10.4172/2329-9568.S2-003
  • Uğur, Ş.S., Sarıışık, M., Türkoğlu, G., Erkan, G., Erden, E., Layer by layer assembly of antibacterial inclusion complexes, International Journal of Clothing Science and Technology, 2016,28,3,368.
  • Uğur, Ş.S., Sarıışık, M., Çok tabakalı kaplama yönteminin emdirme metoduna göre uygulanabilirliğinin araştırılması, Tekstil ve Mühendis, 23, 103, 213-219.
  • Üren, N., Okur, A. A novel approach for precise determination of in-plane shear behavior of woven fabrics, Textile Research Journal, August 5, 2016, doi: 10.1177/0040517516652346,

2015 

  • İnceboz, T., Erkan, G., Türkoğlu, G.C., Sarıışık, A.M., Bakırcı, S., Üner, S., Üner, A., 2015, In-vivo and in-vitro tick repellent properties of cotton fabric, Textile Research Journal, November; 85, 19, 2071-2082.
  • Erkan, G., Sarıışık, M. (2015), Antifungal Microcapsules of Ethyl Cellulose by Solvent Evaporation and Their Application to Cotton Fabric. Fibres & Textiles in Eastern Europe ; 23, 6(114): 125-130.
  • Erdoğan, Ü., Seki, Y., Aydoğdu, G., Akşit, A., Kutlu, B. (2015). An investigation on structural properties of jute particle doped polypropylene filaments, Industria Textila, 66(5), 243-250.
  • Atasağun, H.G., Öner, E., Okur, A., Beden, A.R. (2015).   A comprehensive study on the general performance properties of Viloft-blended knitted fabrics, The Journal of The textile Institute, 106(5), 523-535.
  • Atasağun, H.G., Okur, A. (2015).  The wetting and moisture transmission properties of woven shirting fabrics, Industria Textila, 66(6), 344-352.
  • Altınışık, A., Seki, Y., Ertaş, S., Akar, E., Bozacı, E., Seki, Y. (2015). Evaluating of Agave americana fibers for biosorption of dye from aqueous solution, Fibers and Polymers, 16(2), 370-377.
  • Kayacan, Ö. Kayacan, E. Bulgun, B. Eser, M. Pamuk, “Design methodology and performance studies of a flexible electrotextile surface”, Autex Research Journal, 15/3/153-157, 2015
  • O.Kayacan, “Comparative study about the effect of cleaning processes on the transmission performance of textile based conductive lines”, Industria Textila, 66/4/176-183, 2015
  • Öner, E., Okur, A., 2015, Thermophysiological comfort properties of selected knitted fabrics and design of T-shirts, The Journal of The Textile Institute, Volume 106,  Issue 12,1403–1414. http://dx.doi.org/10.1080/00405000.2014.995931
  • Özdemir,H., Seçkin Uğurlu, Ş., Özkurt, A. (2015),”The Electromagnetic Shielding of Textured Steel Yarn Based Woven Fabrics Used for Clothing”, Journal of Industrial Textiles, 45 (3), 416-436.
  • Özdemir, H., Kılınç, S. (2015) ,”Smart Woven Fabrics with Portable and Wearable Vibrating Electronics”, Autex Research Journal, 15 (2), 99-103.
  • Plattürk, G.G., KILIÇ, M. (2015). A New Image Analysis Based Device and A New Method to Determine Fabric Drape and Bending Stiffness. Industria Textila, 66(3), 146-152.
  • Sabuncu, M. H., Özdemir, H. (2015).”Recognition of Fabric Weave Patterns Using Optical Coherence Tomography”, The Journal of The Textile Institute, 26 Nov 2015, 1-7.
  • Sülar, V., Mesegül, C., Kefsiz, H. And Seki,Y. (2015). A comparative study on seam performance of cotton and polyester woven fabrics, The Journal of The Textile Institute, 106(1), 19-30.
  • Uğur, Ş., Sarıışık, M., 2015, Deposition of nanoparticle multilayers to improve mechanical properties of denim fabrics, The Journal of The Textile Institute, Volume 106Issue 7, 718-724.
  • Yalkın, E., Murat, İ.B., Alpyıldız, T. (2015). Enhanced mechanical performance of foam core sandwich composites with through the thickness reinforced core. Composites Part B:Engineering, 79(15), 383-391., Doi: 10.1016/j.compositesb.2015.04.055

2014 

  • Andiç-Çakir, Ö., Sarikanat, M., Tüfekçi, H.B., Demirci, C., Erdoğan, Ü.H. “Physical and Mechanical Properties of Randomly Oriented Coir Fiber-Cementitious Composites”, Composites Part B: Engineering, 61, 49-54, 2014.
  • Arıcı, M., Topbaş, Ö., Karavana, S.Y., Ertan, G., Sarıışık, M., Öztürk, C. “Preparation of Naproxenethy Cellulose Microparticles by Spray-Drying Technique and Their Application to Textile Materials”, Journal of Microencapsulation, 1464-5246, 2014.
  •  Atasağun, H.G., Öner, E., Okur, A., Beden, A.R.”A Comprehensive Study on the General Performance Properties of Viloft-blended Knitted Fabrics”, The Journal of The Textile Institute, DOI:10.1080/00405000.2014.929270, 2014.
  • Büyükbayraktar, R.B. “The Relationship between The Bagging Deformation and Air Permeability Performance of Woven fabrics”, Industria Textila, 65(1), 10-16, 2014.
  • Erkan, G., Sarıışık, M., Pazarlıoğlu, N.K., “Antifungal Cotton Fabric via Molecular Encapsulation of Terbinafine, Cellulose Chemistry and Technology, 48, 7-8, 753-760, 2014.
  • Erkan, G., Şengül, K., Kaya, S. “Dyeing of White and Indigo Dyed Cotton Fabrics with Mimosa Tenuiflora Extract”, Journal of Saudi Chemical Society, 18(2), 139-148, 2014.
  •  Karabay G, “A Comparative Study on Designing of a Clothing Assembly Line”, Tekstil ve Konfeksiyon, 24(1), 124-133, 2014. Kılıç, M., Büyükbayraktar, R.B.,  Balci Kilic, G., Aydin, Ş., Eski, N. “Comparing The Packing Densities of Yarns Spun by Ring, Compact and Vortex Spinning Systems Using Image Analysis Method”, Indian Journal of Fibre & Textile Research, 39, 351-357, 2014.
  • Kılıç, M., Okur.A. “Comparison of the Results of Different Hairiness Testers for Cotton-Tencel Blended Ring, Compact and Vortex Yarns”, Indian Journal of Fibre & Textile Research, 39, 49-54, 2014.
  • Öner, E., Okur, A.”Thermophysiological Comfort Properties of Selected Knitted Fabrics and Design of Tshirts”, The Journal of The Textile Institute, DOI:10.1080/00405000.2014.995931, 2014.
  • Seki, Y., Seki, Y., Sarıkanat, M., Sever, K., Durmuşkahya, C., Bozacı, E. “Evaluation of Linden Fibre as A Potential Reinforcement Material for Polymer Composites”, Journal of Industrial Textiles, DOI:10.1177/1528083714557055, 2014.
  • Selver, M.A., Avşar, V., Özdemir, H. “Textural Fabric Defect Detection Using Statistical Texture Transformations and Gradient Search”, The Journal of The Textile Institute, 1-11, 2014.
  • Sülar, V., Bulut, Y. “Tensile, Knot and Detaching from Needle Performances of Atraumatic Surgical Sutures”, International journal of polymeric materials and polymeric biomaterials, 63(5), 256-261, 2014.
  • Uğur, Ş.S., Sarıışık, A.M. “Nano Polyurethane Based Surface Modification on Thee Anti-Felting Functionalization of Wool Fabrics”, Progress in Organic Coatings, 77, 1249-1252, 2014.

2013 

  • Bulut, Y., Sular, V. “Manufacturing and Sewing Performance of Polyurethane and Polyurethane/Silicone Coated Fabrics”, Materials and Manufacturing Processes, 28, 106-111, 2013.
  • Bulut, Y., Akşit, A. “A Comparative Study On Chemical Treatment Of Jute fiber: Potassium Dichromate, Potassium Permanganate And Sodium Perborate Trihydrate”, Cellulose, 20, 3155-3164, 2013.
  • Deveoglu, O., Erkan, G., Torgan, E., Karadag, R.”The evaluation of Procedures for Dyeing Silk with Buckthorn and Walloon Oak on The Basis of Colour Changes And Fastness Characteristics”, Coloration Technology, 129, 3, 223-231, 2013.
  • Durur, G., Öner, E. “The Comfort Properties of the Terry Towels Made of Cotton and Polypropylene Yarns”, Journal of Engineered Fibers and Fabrics, 8(2), 1-10, 2013.
  • Karabay, G. “Working Capital Management in Turkish Clothing Industry, Tekstil ve Konfeksiyon”, 23(2), 168-175, 2013.
  • Kilic, M. and Okur, A. Comparison of the Results of Different Hairiness Testers for Cotton-Tencel Blended Ring, Compact and Vortex Yarns. Indian Journal of Fibre & Textile Research. (accepted for publication in 2013).
  • Kurbak, A., Soydan, A.,”Geometrical Model for a Newly Designed Three-Dimensional Functional Rib Knitted Cord”, Textile Research Journal, DOI: 10.1177/0040517512461702, (published online), 2013.
  • Öner, E., Okur, A. “The Effect of Different Knitted Fabrics’ Structures on the Moisture Transport Properties”, The Journal of The Textile Institute, DOI:10.1080/00405000.2013.782214, 2013.
  • Öner, E., Atasağun, H. G., Okur, A. , Beden, A. R., Durur, G. “Evaluation of Moisture Management Properties on Knitted Fabrics”, The Journal of The Textile Institute, DOI:10.1080/00405000.2012.752895, 2013.
  • Ortlek, H.G., Alpyildiz, T., Kilic, G.”Determination of Electromagnetic Shielding Performance Of Hybrid Yarn Knitted Fabrics With Anechoic Chamber Method”, Textile Research Journal, 83,1, 90-99, 2013.
  • Özdemir, H., Özkurt, A.,”The Effects of Fabric Structural Parameters on the Electromagnetic Shielding Effectiveness of Diced Woven Fabrics”, Tekstil, (Accepted), 2013.
  • Özdemir, H., Özkurt, A.,”The Effects of Weave and Conductive Yarn Density on the Electromagnetic Shielding Effectiveness of Cellular Woven Fabrics”, Tekstil ve Konfeksiyon, 23 (2), 124-135, 2013.
  • Özdemir, H., Mert, E.,”The Effects of Fabric Structural Parameters on the Breaking, Bursting and Impact Strengths of Diced Woven Fabrics”, Tekstil ve Konfeksiyon, 23 (2), 113-123, 2013.
  • Özdemir, H., Mert, E.,”The Effects of Fabric Structural Parameters on the Tensile, Bursting and Impact Strengths of Cellular Woven Fabrics”, Journal of the Textile Institute, 104 (3), 330-338, 2013.
  • Sarıışık, M., Arıcı, M., Karavana, S.Y., Öztürk, C., Ertan, G. “Design of Orthopedic Support Material Containing Diclofenac Sodium Microparticles: Preparation and Characterization of Microparticles and Application to Orthopedic Support Material”, Textile Research Journal, 83,10,1030-1043, 2013.
  • Sülar, V., Öner, E., Okur, A. “The Roughness and Frictional Properties of Cotton and Polyester Woven Fabrics”, Indian Journal of Fibre & Textile Research, 38, 349-356, 2013.
  • Turan, R.B. “The Relationship between the Bagging Deformation and Air Permeability Performance of Woven Fabrics”, Industria Textila, (Accepted), 2013.
  • Turan, R.B., Okur, A. “A 3-D Model Study for 2/1 Twill and 3/1 Twill Weaves”, Indian Journal of Fibre & Textile Research, 38(8), 251-258, 2013.
  • Turan, R.B., Okur, A. “Prediction of The In-Plane and Through-Plane Fluid Flow Behavior of Woven Fabrics”, Textile Research Journal, 83, 7, 700-717, 2013.

2012 

  • Raziye Befru Turan, Ayşe Okur, Remziye Deveci, Merve Açıkel,”Predicting the Intra-Yarn Porosity by Image Analysis Method”, Textile Research Journal, Accepted, 2012.
  • Ayse Bedeloglu, Nilsen Sunter, Bekir Yildirim, Yalcin Bozkurt,”Bending and Tensile Properties of Cotton/Metal Wire Complex Yarns produced for electromagnetic shielding and conductivity applications”, The Journal of The Textile Institute, Publication date:19 Apr 2012. DOI:10.1080/00405000.2012.677568, 2012.
  • R. Befru Turan, Ayşe Okur,”The Variation of the Yarn Cross-Section in the Fabric”, Textile Research Journal, Accepted, 2012.
  • R. B. Turan, A. Okur,”Investigation of pore parameters of woven fabrics by theoretical and image analysis methods”, The Journal of The Textile Institute, Online published, 2011.
  • R: B. Turan, G. Başer,”Three-dimensional computer simulation of 2/2 twill woven fabric by using Bsplines”, The Journal of The Textile Institute, Vol. 101, No. 10, October 2010, 870-881, 2010.
  • Kutlay Sever, Mehmet Sarikanat, Yoldaş Seki, Gökhan Erkan, Ümit Halis Erdoğan, Seckin Erden,”Surface Treatments of Jute fabric: The Influence of Surface Characteristics on Jute Fabrics and Mechanical Properties of Jute/Polyester Composites”, Industrial Crops and Products, 35/22-30/2012.2

201

  • Kurumer G, Karabay G, Sever S,”A Research On Workers Selectıon And Training In Apparel Industry”, Tekstil ve Konfeksiyon, 2/2011 p.171-175, 2011.
  • Karabay G, Kurumer G,”A Study On Decreasıng Lead Time Of Fabric Supply in an Apparel Subcontractor”, Tekstil ve Konfeksiyon, Yıl: 21 Sayı: 3 Sayfa: 294-300, 2011.
  • Ayse (Celik) Bedeloglu, Pablo Jimenez, Ali Demir, Bozkurt Y, Wolfgang K. Maser, Niyazi Serdar Sariciftci,”Photovoltaic Textile Structure Using Polyaniline/Carbon Nanotube Composite Materials”, The Journal of the Textile Institute, 102/10/857-862/2011.
  • Bedeloğlu A, Sunter N, Bozkurt Y,”Manufacturing and properties of yarns containing metal wires”, Materials and Manufacturing Processes, 26/11/1378-1382/2011.
  • Kılıç M, Okur A,”The Properties of Cotton-Tencel and Cotton-Promodal Blended Yarns Spun In Different Spinning Systems”, Textile Research Journal, 81/2/156-172/2011.
  • Alpyıldız T, Rochery M, Kurbak A, Xavier F,”Stab and cut resistance of knitted structures: a comparative study”, Textile Research Journal, 81/2/205-214/2011.
  • Fatma Ceken, Ü. Halis Erdoğan, Ozan Kayacan, Şebnem Seçkin Uğurlu,”Electromagnetic Shielding Efficiency of Nonwoven Insulation Panels Designed with Recycled Textiles and Copper Wires”, Journal of the Textile Institute, Corrected Proof, 2011.
  • Ümit Halis Erdogan, Nilufer Erdem,”A theoretical approach for predicting the tensile behavior of needle punched-heat set heavy geotextiles”, Industria Textila, 62/5/227-232/2011.
  • Umit Halis Erdogan, Nilufer Erdem,”Modelling the Tensile Behaviour of Needle Punched Nonwoven Geotextiles”, International Journal of Clothing Science and Technology, 23/4/258-268/2011.
  • Şule S Uğur, Sarıışık A,”Electrostatic self-assembly dyeing of cotton fabrics”, Coloration Technology, 127, 6, 372-375, 2011,
  • Şule S. Uğur, Merih Sarıışık, A. Hakan Aktaş,”Nano-TiO2 Based Multilayer Film Deposition on Cotton Fabrics for UV-Protection”, Fibers and Polymers, 12/2/190-196/2011.
  • Nurdan Kasikara Pazarlioglu, Alper Akkaya, A. Merih Sarıışık, Gokhan Erkan, E. Perrin Akcakoca Kumbasar,”Dyeing of Wool Fibers with Natural Fungal Dye from Suillus luteus”, Asian Journal of Chemistry, Vol.23, No.6, 2600-2604, 2011.
  • Ş.S.Uğur, Sarıışık M., Aktaş, H.,”Nano Al2O3 multilayer film deposition cotton fabrics by layer by layer deposition method”, Materials Research Bulletin, 46,1202-1206, 2011.
  • Yavuz Şenol, Taner Akkan, Ender Yazgan Bulgun, Ozan Kayacan,”Active T-shirt”, International Journal of Clothing Science and Technology, 23 / 4 / 249-257 / 2011,
  • Fatma Çeken, Özlem Kayacan, Ahmet Özkurt, Şebnem Seçkin Uğurlu,”The electromagnetic shielding properties of some conductive knitted fabrics produced on single or double needle bed of a flat knitting machine”, Journal of the Textile Institute, DOI:10.1080/00405000.2011.639514, 2011.
  • Tuba Alpyildiz,”3D Geometrical Modelling of Tubular Braids”, Textile Research Journal, DOI:10.1177/0040517511427969, 2011.
  • Yasemin Bulut, Vildan Sülar,”Effects of process parameters on mechanical properties of coated fabrics”, International Journal of Clothing Science and Technology, Vol.23, No.4, 205-221, 2011.

2010 

  • · Erdem, N., Erdogan, U.H., Cireli Aksit, A., Onar, N., “Structural and UV-Protectivity Properties of Nano-TiO2 Doped Polypropylene Filaments”, Journal of Applied Polymer Science, Vol. 115(1), 152-157, 2010.
  • · Kayacan, Ö.,  Kurbak, A., “Effect of Garment Design on Liquid Cooling Garments”, Textile Research Journal, Vol. 80(14),1442-1455, 2010.
  • · Erdem, N., Erdogan, Ü.H., Aksit Cireli, A., Onar, N., “Structural and Ultraviolet-Protective Properties of Nano-TiO2-Doped Polypropylene Filaments”, Journal of Applied Polymer Science, Vol. 115 (1), 152-157, 2010.
  • · Sever K., Sarıkanat, M., Seki Y., Erkan, G., Erdoğan, Ü.H., “The Mechanical Properties of -Gam Methacryloxypropyltrimethoxysilane Treated Jute/Polyester Composites”, Journal of Composite Materials, Vol. 44(15), 1913-1924, 2010.
  • · Kaplan, S., Okur, A. “A New Dynamic Sweating Hotplate System for Steady-State and Dynamic Thermal Comfort Measurements”, Measurement Science and Technology, Vol. 21(8), 1-8, 2010.
  • · Kılıç, M., Okur, A., “The Properties of Cotton-Tencel and Cotton-Promodal Blended Yarns Spun in Different Spinning Systems”, Textile Research Journal, DOI: 10.1177/0040517510377828, 2010.
  • · Turan, R.B., Başer, G., “Three Dimensional Computer Simulation of 2/2 Twill Woven Fabric By Using B-Splines”, Journal of the Textile Institute, Vol. 101(10), 870 – 881, 2010.
  • · Uğur, S.Ş., Sarıışık, M., Aktaş, A.H., “The Fabrication of Nanocomposite Thin Films with TiO2Nanoparticles by The Layer-by-Layer Deposition Method for Multifunctional Cotton Fabrics”, Nanotechnology, 21, 325603, 2010.
  • · Uğur, S.Ş., Sarıışık, M., Aktaş, A.H., Uçar, M.Ç., Erden, E., “Modifiying of Cotton Fabric Surface With Nano-Zno Multilayer Films by Layer-by-Layer Deposition Methods”, Nanoscale Research Letters, 5/1204-1210/2010, 2010.
  • · Erkan, G., Sarıışık, M, Pazarlıoğlu, Kaşıkara, N., “The Microencapsulation of Terbinafine Via in Situ Polymerization of Melamine-Formaldehyde and Their Application to Cotton Fabric”, Journal of Applied Polymer Science, DOI: 32525, 2010.
  • · Çelik Bedeloğlu, A., Jimenez, P., Demir, A., Bozkurt, Y., Wolfgang, K., Maser, Sarıçiftçi, N.S., “Photovoltaic Textile Structure Using Polyaniline/Carbon Nanotube Composite Materials”, The Journal of the Textile Institute, accepted on 16 Sep 2010. 2011.
  • · Celik Bedeloğlu, A., Demir, A., Bozkurt, Y., Sarıçiftçi, N.S., “Photovoltaic Properties of Polymer Based Organic Solar Cells Adapted for Non-Transparent Substrates”,Renewable Energy, 35/10/2301-2306/2010, 2010.
  • · Celik Bedeloğlu, A., Demir, A., Bozkurt, Y., Sarıçiftçi, N.S., “A Photovoltaic Fibre Design for Smart Textiles”, Textile Research Journal, 80/11/1065-1074/2010, 2010.
  • · Celik Bedeloğlu, A., Koeppe, R.,  Demir, A., Bozkurt, Y., Sarıçiftçi, N.S., “Development of Energy Generating Photovoltaic Textile Structures for Smart Applications”, Fibers and Polymers, 2010.
  • · Kutlu, B., Aksit, A., Mutlu, M., “Surface Modification of Textiles by Glow Discharge Technique: Part II: Low Frequency Plasma Treatment of Wool Fabrics with Acrylic Acid”, Journal of Applied Polymer Science, Vol.106(3), 1545-1551, 2010.
  • · Pamuk G., Çeken F., İçten B., Karakuzu R., “Mechanicel Properties of Spacer fabric-reinforced Composites Knitted from Glass Yarn” Journal of Composite Materials, 2010.
  • · Bulut, Y., Sülar, V., “Effects of Process Parameters on Mechanical Properties of Coated Fabrics”, International Journal of Clothing Science and Technology, accepted for publication.

2009 

  • · Onar, N., Aksit, Cireli, A., Ebeoglugil, M. F., Birlik, I., Celik, E. , Ozdemir, I., “Structural, Electrical and Electromagnetic Properties of Cotton Fabrics Coated with Polyaniline and Polypyrrole”, Journal Applied Polymer Science, Vol.114(4), 2003-2010, 2009.
  • · Aksit, A., Onar, N., Ebeoglugil, M.F., Birlik, I., Celik, E., Ozdemir, I., “Electromagnetic and Electrical Properties of Coated Cotton Fabric with Barium Ferrite Doped Polyaniline Film”, Journal of Applied Polymer Science, Vol. 113(1), 358-366, 2009.
  • · Tarhan, M., Sarıışık, M., ”A Comparison Among Performance Characteristics of Various Denim Fading Processes”, Textile Reseach Journal, Vol. 79, 301- 309, 2009.
  • · Kurbak, A., ”Geometrical Models for Balanced Rib Knitted Fabrics Part I: Conventionally Knitted 1×1 Rib Fabrics”, Textile Research Journal, Vol. 79(5), 418-435, 2009.
  • · Kurbak, A., Alpyıldız, T., “Geometrical Models for Balanced Rib Knitted Fabrics Part II: Applications of 1×1 Rib Model to Presser-foot Knitted 1×1 Rib, Interlock and Half Milano Rib”, Textile Research Journal, Vol. 79(6), 495– 505, 2009.
  • · Yeşilpınar, S. Aytaç, V., ”An Approach Aimed at Fabric Consumption in Shirt Production”, Textile Research Journal, Vol.79, 461-467, 2009.
  • · Çeken, F., Pamuk, G., “A Research on the Breaking and Tearing Strengths and Elongation of Automobile Seat Cover Fabrics”, Textile Research Journal, Vol.79(1), 48-58, 2009.
  • · Alpyildiz, T., İçten, B.M., Karakuzu, R., Kurbak, A., “The Effect of Tuck Stitches on The Mechanical Performance of Knitted Fabric Reinforced Composites”, Composite Structures, Vol.89(3), 391-398, 2009.
  • · Erdem, N., Akşit, A., Erdogan, U.H. “Flame Retardancy Behaviors and Structural Properties of Polypropylene/Nano-SiO2 Composite Textile Filaments”, Journal of Applied Polymer Science, Vol. 111 (4), 2085-2091, 2009.
  • · Kurbak A., Soydan A.S., “Geometrical Models for Balanced Rib Knitted Fabrics Part III: 2×2, 3×3, 4×4 and 5×5 Rib Fabrics”, Textile Research Journal, Vol.79(7), 618-625, 2009.
  • · Kurbak, A., Alpyildiz, T., “Geometrical Models for Cardigan Structures Part I:   Full Cardigan”,Textile Research Journal, Vol. 79(14): 1281–1300, 2009
  • · Kurbak, A., Alpyildiz, T., “Geometrical Models for Cardigan Structures Part II: Half Cardigan”, Textile Research Journal, Vol. 79(18): 1635–1648, 2009
  • · Kayacan,O., Bulgun,E., Sahin,O., “Implementation of Steel-based Fabric Panels in a Heated Garment Design”, Textile Research Journal, Vol.79(16), 1427-1437, 2009.
  • · Kayacan,O., Bulgun,E., “Heating Behaviors of Metallic Textile Structures”, International Clothing Science and Technology, Vol. 21(2/3), 127-136, 2009.
  • · Yeşilpınar, S., Aytaç, V., “An Approach Aimed at Fabric Consumption in Shirt Production”, Textile Research Journal, Vol.79(5), 461-467, 2009.
  • · Yeşilpınar, S., Aytaç, V., Khalilov, F., Bozkurt, L., “Development of Software That Calculates The Fabric Consumption of Garments in Clothing Factories”, The Textile Institute, Vol.100(7), 626-632, 2009.
  • · Kaplan, S., Okur, A., “Determination of Coolness and Dampness Sensations Created by Fabrics by Forearm Test and Fabric Measurements”, Journal of Sensory Studies, Vol. 24(4), 479-497, 2009.
  • · Tarkan, M., Sarışık, M., “A Comparison among Performance Characteristics of Various Denim Fading Processes”, Textile Research Journal, Vol.79, 301-309, 2009.
  • · Bedeloğlu, A., Demir, A., Bozkurt, Y., Sariciftci, N.S., “A Flexible Textile Structure Based on Polymeric Photovoltaics Using Transparent Cathode”, Synthetic Metals, Vol. 159 (19/20), 2043-2048, 2009.
  • · Bedeloğlu, A., Demir, A., Bozkurt, Y., Sariciftci, N.S.,” A Photovoltaic Fibre Design for Smart Textiles”, Textile Research Journal, 2010.

2008

  • ·Sibel Kaplan, Ayşe Okur, “The Meaning and Importance of Clothing Comfort: A Case Study for Turkey”, Journal of Sensory Studies,vol:23,number:5, pp.688-706,october 2008.
  • · Ayşe Okur, Efendi N. Nasibov, Musa Kiliç, Murat Yavuz,”Using OWA aggregation technique in QFD: a case study in education in a textile engineering department”, Quality and Quantity, Online First, 2008.
  • · Vildan Sülar, Ayşe Okur, “Objective Evaluation of Fabric Handle by Simple Measurement Methods”, Textile Research Journal,V 78, p 856-868, 2008.
  • · Vildan Sülar, Ayşe Okur, “Handle Evaluation of Men’s Suitings Produced in Turkey”, Fibres and Textiles in Eastern Europe, 16(2), p61-68, 2008.
  • · Hakan Özdemir, G. Başer,”Computer Simulation of Plain Woven Fabric Appearance from Yarn Photographs”, Journal of the Textile Institute, First published on 12 June 2008, DOI: 10.1080/00405000701757529
  • · Hakan Özdemir, Güngör Başer,”Computer Simulation of Woven Fabric Appearances Based on Digital Video Camera Recordings of Moving Yarns”, Textile Research Journal, Vol.78, No: 2, pp 148-157, 2008.
  • · Aysun Akşit, Nurhan Onar, “Leaching and Fastness Behavior of Cotton Fabrics Dyed with Different Type Dyes Using Sol- Gel Process”, Journal of Applied Polymer Science, 109, pp./97-105, 2008.
  • · Tuba Alpyildiz, Bulent Murat Icten, Ramazan Karakuzu and Arif Kurbak, “The effect of tuck stitches on the mechanical performance of knitted fabric reinforced composites”, Composite Structures, 2008, doi:10.1016/j.compstruct.2008.09.004
  • · Özlem Kayacan, Arif Kurbak, “Basic Studies for Modeling Complex Weft Knitted Fabric Structures Part IV: A Geometrical Modeling of Miss Stitches” Textile Research Journal, 78(8), 659-663, 2008
  • · Arif Kurbak, Ozlem Kayacan,”Basic Studies for Modeling Complex Weft Knitted Fabric Structures Part V: Geometrical Modeling of Tuck Stitches”, Textile Research Journal, 78 (7) ,577-582, 2008.
  • · A rif Kurbak, Ali Soydan,”Basic Studies for Modeling Complex Weft Knitted Fabric Structures Part III: A Geometrical Model for 1 × 1 Purl Fabrics”, Textile Research Journal, 78(5), 377-381, 2008
  • · Arif Kurbak, Ozlem Kayacan,”Basic Studies for Modeling Complex Weft Knitted Fabric Structures Part II: A Geometrical Model for Plain Knitted Fabric Spirality”, Textile Research Journal, 78(4), 279-288, 2008
  • · Arif Kurbak, Tuba Alpyıldız,”A Geometrical Model for the Double Lacoste Knits”, Textile Research Journal, 78(3), 232 – 247, 2008.
  • · Arif Kurbak, Özgür Ekmen,”Basic Studies for Modeling Complex Weft Knitted Fabric Structures Part I: A Geometrical Model for Widthwise Curlings of Plain Knitted Fabrics”, Textile Research Journal, 78, 198-208, 2008
  • · Fatma Ceken, Gülşah Pamuk, “Comparative Study of the Abrasion Resistance of Automobile Seat Covers, Fibers and Textiles in Eastern Europe”, Vol. 16, No.4, 2008, pp. 57-61
  • · Gülşah Pamuk, Fatma Çeken, “An Investigation on the Air Permeability of Automobile Seat Cover Farbics”, Tekstil, Vol. 57, March 2008, p96-102.
  • · Gülşah Pamuk, Fatma Çeken, “Recyclable Spacer Fabrics for Automotives”, AATCC Review, August 2008, pp. 32-36
  • · Fatma Ceken, Gülşah Pamuk, “Manufacturing of Weft Knitted Fabric Reinforced Composite Materials: A Review”, Materials and Manufacturing Processes, 23 (7), pp.635-640, 2008.


2007

  • · Yeşilpınar, S. & Bahar, S., “The Effect of Sewing and Washing Processes on the Seam Strength of Denim Trousers”, AATCC Review, October 2007, 27-31
  • · Onar, N., Ebeoglugil, M.F., Kayatekin, I., Celik, E., Low-temperature, sol-gelsynthesized, silver-doped titanium oxide coatings to improve ultraviolet-blocking properties for cotton fabrics, 2007, Journal Applied Polymer Science, 106, 1, 5 October, 514-525
  • · Cireli,A., Onar,N., Ebeoglugil,F., Kayatekin,I., Kutlu,B., Culha,O., Celik,E., Development of flame retardancy properties of new halogen-free phosphorous doped SiO2 thin films on fabrics, Journal of Applied Polymer Science, Volume 105, Issue 6, 15 September 2007, pp. 3748-3756
  • · Sülar, V, Okur, A., “New Application of A Surface Roughness Tester On Fabrics”, AATCC Review, Vol. 7, No. 9, September 2007, pp39-43
  • · Cireli,A., Kutlu,B.,Mutlu,M. Surface modification of polyester and polyamide fabrics by low frequency plasma polymerization of acrylic acid, Journal of Applied Polymer Science, Volume 104, Issue 4, Date: 15 May 2007, Pages: 2318-2322
  • · Amreeva, G. & Kurbak, A. (2007). Experimental Studies on the Dimensional Properties of Half Milano and Milano Rib Fabrics, Textile Research Journal Vol 77(3): 151–160
  • · Sülar, V, Okur, A., “Sensory Evaluation Methods for Tactile Properties of Fabrics”, Journal of Sensory Studies, February 2007, Vol:22, Issue: 1, p: 1-16
  • · Ceken, F. & Kayacan, O. The Effects of Some Machine Parameters on the Spirality in Single Jersey Fabrics, Fibers and Polymers 2007, Vol.8, No.1, 89-97

2006

  • · Kılıç,M., Okur,A.”Relationships Between Yarn Diameter / Diameter Variation and Strength”, Fibres and Textiles in Eastern Europe, vol.14, no.5(59), p.84-87 2006
  • · Alpyildiz, T. & Kurbak, A. (2006). A Geometrical Model for the Single Pique (Lacoste) Knits, Textile Research Journal Vol 76(11): 861–867
  • · Kurbak, A. & Amreeva, G., (2006). Creation of a Geometrical Model for Milano Rib Fabric Textile Research Journal Vol 76(11): 847–852
  • · Özdemir H., Başer, G., “Computer Simulation of Woven Fabric Defects Based on Faulty Yarn Photographs”, The 21st International Symposium on Computer and Information Sciences- ISCIS’06, İstanbul, November, 2006, Bildiri kitabı LNCS (Lecture Notes in Computer Science) serisinde basıldı, Cilt No: 4263, Springer, Berlin, 2006.
  • · Genç,G., Alp,B., Balköse,D., Ülkü,S., Cireli,A. Moisture sorption and thermal characteristics of polyaramide blend fabrics, Journal Applied Polymer Science, Volume 102, Issue 1, Date: 5 October 2006, Pages: 29-38
  • · Yesilpinar, S. “Analysis of Performance of Sewing Threads Manufactured from Conventional Ring-Spun Yarns”, Fibres and Textiles in Eastern Europe, Vol.14, No.2(56), April/Juni 2006,20-23
  • · Cireli,A., Yurdakul,B., Application of cyclodextrin to the textile dyeing and washing processes, Journal Applied Polymer Science, Volume 100, Issue 1, Date: 5 April 2006, Pages: 208-218
  • · Abdullayev, G., Palamutçu, S., Hasçelik, B., Soydan, A.S., Synthesis of a New Dobby Mechanism. Tekstil Vol.55 No.4 p184-188 Zagreb, April 2006.